———————————————————————————————————————— Names of Machine Parts and Their Functions
Cover C
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Needle and presser foot
section
1
Buttonhole lever
Lower the buttonhole lever when sewing buttonholes
and bar tacks.
2
Thread guide discs
Pass the thread through the thread guide discs when
using the needle threader to thread the needle.
3
Needle bar thread hook
Pass the upper thread through the needle bar thread
hook.
4
Needle plate
The needle plate is marked with guides for sewing
straight seams.
5
Bobbin cover/shuttle
Remove the bobbin cover, and then insert the bobbin
into the shuttle.
6
Feed dogs
The feed dogs feed the fabric in the sewing direction.
7
Presser foot
The presser foot applies pressure consistently on the
fabric as the sewing takes place. Attach the appropriate
presser foot for the selected stitching.
8
Presser foot holder
The presser foot is installed onto the presser foot holder.
Right-side/rear view
1
Presser foot dial
Use the presser foot dial to adjust the amount of
pressure that the presser foot applies to the fabric.
2
Handle
Carry the sewing machine by its handle when
transporting the machine.
3
Balance wheel
Turn the balance wheel toward you to raise and lower
the needle to sew one stitch.
4
Air vent
The air vent allows the air surrounding the motor to be
exchanged. Do not cover the air vent while the sewing
machine is being used.
5
Main power switch
Use the main power switch to turn the sewing machine
on and off.
6
Foot controller jack
Insert the plug on the end of the foot controller cable
into the foot controller jack.
7
Power supply jack
Insert the plug on the power supply cord into the power
supply jack.
8
Feed dog position switch
Use the feed dog position switch to lower the feed dogs.
Memo
●
Refer to Cover B, D or E pages while you
are learning to use your machine.
1
2
3
4
5
6
7
8
2
3
5
6
4
7
8
1
