14. SETTING THE WORK CLAMP MODE
61
KE-434C,435C
memo-42
Pedal specifications
Raising the presser at the sewing end
11
Three pedals
(Option)
The left pedal raises and lowers the left and right work clamps, and the right pedal
(center) detects the home position.
The start (right) pedal is used to start sewing. For the KE-435C, both work clamps
are lowered when DIP switch A-2 is ON, and the stepping foot is also lowered at the
same time.
12
Three pedals
(Option)
The left pedal raises and lowers the left work clamp, and the right pedal (center)
detects the home position.
When the start pedal (right side) is depressed for a short time (200 ms), the right
work clamp is lowered, and when it is depressed for a longer time the right work
clamp is lowered and then sewing starts.
For the KE-435C, the right work clamp is lowered when DIP switch A-2 is ON, and
the stepping foot is also lowered at the same time.
13
Two pedals
Two-pedal operation raises and lowers the left and right work clamps
simultaneously, and the stepping foot is lowered at the sewing start.
When memo-42 has been used to make a special setting, DIP switches A-1 and A-2 function as follows.
•
When DIP switch A-1 is at ON, the pressers are not raised automatically at the sewing end.
•
DIP switch A-2 is ignored except when memo-42 = 8, 11, 12.
