SETUP SEND
6 - 11
Real Time Transmission
When you are sending a fax, the MFC will scan the originals into the
memory before sending. Then, as soon as the phone line is free, the
MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real
time (even if
REAL TIME TX
is set to
OFF
).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission.
If you want to fax multiple pages, use Dual Access. (See
Dual
Access (Not available for colour faxes)
on page 6-10.)
You can set
REAL TIME TX
to
ON
for all documents or for the next
fax only.
1
Place the original face down on the scanner glass.
2
Press
Menu/Set
,
2
,
2
,
5
.
3
To change the default setting, press
to select
ON
(or
OFF
).
Press
Menu/Set
.
Go to Step 5.
—
OR
—
For the next fax transmission only, press
to select
NEXT
FAX ONLY
.
Press
Menu/Set
.
4
Press
to select
ON
(or
OFF
).
Press
Menu/Set
.
5
Press
1
if you want to choose more
settings and the LCD will return to
the
SETUP SEND
menu.
—
OR
—
Press
2
if you have finished choosing
settings for this page, and then go to Step 6.
6
Enter the fax number.
7
Press
Fax Start
to send the fax.
If you are sending a colour Fax, the MFC will send it in real time
(even if
REAL TIME TX
is set to
OFF)
.
SETUP SEND
5.REAL TIME TX
NEXT
1.YES 2.NO
