11
10
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature see
Printing reports
in the
Advanced User's Guide
.
11
Set tone or pulse dialing
mode (Canada only)
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
a
Press
Menu
,
0
,
4
.
b
Press
a
or
b
to choose
Pulse
(or
Tone
).
Press
OK
.
c
Press
Stop/Exit
.
12
Set the telephone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a
Press
Menu
,
2
,
0
,
1
.
b
Press
a
or
b
to choose
Basic(for VoIP)
.
Press
OK
.
c
Press
Stop/Exit
.
13
Dial Prefix
The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
a
Press
Menu
,
0
,
5
(for Canada, press
6
).
b
Enter the prefix number (up to 5 digits) on the
dial pad, and then press
OK
.
c
Press
Stop/Exit
.
Note
If you are using an analog telephone line you can
skip this step.
Note
• You can use the number 0 to 9, #,
l
and !.
(Press
Hook
to display “!”.)
• You cannot use ! with any other numbers or
characters.
• If your telephone system requires a timed break
recall (hookflash), press
Hook
to enter the
break.
• If the pulse dialing mode is on, # and
l
are not
available to use. (Canada only)
