Brother MFC-J2330DW User Manual Download

Page: 129 / 814

3. Swipe left or right or press

to display the photo you want to print, and then press it.

To print all photos, press

[Print All]

, and then press

[Yes]

to confirm.

4. Enter the number of copies in one of the following ways:

•

Press

[-]

[+]

on the Touchscreen.

•

Press

to display the keyboard on the Touchscreen, and then enter the number of copies using the

Touchscreen keyboard. Press

[OK]

•

Enter the number of copies using the dial pad.

5. Press

[OK]

6. Repeat the last three steps until you have selected all the photos you want to print.
7. Press

[OK]

8. Read and confirm the displayed list of options.
9. To change the print settings, press

[Print Settings]

When finished, press

[OK]

10. Press

[Start]

Related Information

•

Print Photos from a USB Flash Drive on the Brother Machine

•

Print Settings for Photos

122

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands

Brother MFC-J2330DW, User Manual

Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands