Brother MFC-J2330DW User Manual Download

Page: 281 / 814

•

You can save the current settings by pressing

[Save as Shortcut]

•

The Ink Save Mode, Thin Paper Copy, Book Copy and Watermark Copy features are supported by
technology from Reallusion, Inc.

MFC-J2730DW/MFC-J5730DW/MFC-J5930DW

To change copy settings, press the

[Options]

button.

Option

Description

Quality

Select a copy resolution for your type of document.

Paper Type

Select a paper type.
If copying on special paper, set the machine for the type of paper you are using to get
the best print quality.

Paper Size

Select a paper size.
If copying on paper other than A4 size, you must change the Paper Size setting.

Tray Select

Select the tray with the best paper type and size for your document.

Enlarge/Reduce

100%

Enlarge

Select an enlargement ratio for the next copy.

Reduce

Select a reduction ratio for the next copy.

Fit to Page

Adjusts the copy size to fit on the paper size
you have set.

Custom(25-400%)

Enter an enlargement or reduction ratio.

Density

Increase the density to make the text darker.
Decrease the density to make the text lighter.

Stack/Sort

Select to stack or sort multiple copies.

Stack

Sort

Page Layout

Make N in 1, 2 in 1 ID, or Poster copies.

4 in 1

Poster

2-sided Copy

Select to copy on both sides of the paper.

1-sided -> 2-sided

274

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands

Brother MFC-J2330DW, User Manual

Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands