Brother MFC-J2330DW User Manual Download

Page: 116 / 814

Home >

Print from Your Computer (Macintosh)

> Prevent Smudged Printouts and Paper Jams

(Macintosh)

Prevent Smudged Printouts and Paper Jams (Macintosh)

Some types of print media may need more drying time. Change the

Reduce Smudge

option if you have

problems with smudged printouts or paper jams.
1. From an application, such as Apple TextEdit, click the

File

menu, and then select

Print

2. Select

Brother MFC-XXXX

(where XXXX is your model name).

For more page setup options, click the

Show Details

button.

3. Click the application pop-up menu, and then select

Print Settings

The

Print Settings

options appear.

4. Click the

Advanced

print settings list.

5. Click the

Reduce Smudge

menu.

6. Select one of the following options:

Media Type

Option

Description

Plain Paper

2-sided Printing

Simplex Printing

Off

Select this mode to print at
normal speed, using a
normal amount of ink.

Low

Select this mode to print at
a slower speed, using a
normal amount of ink.

High

Select this mode to print at
the same speed as

Low

but using less ink.

Glossy Paper

Off

Select this mode to print at
normal speed, using a
normal amount of ink.

Select this mode to print at
a slower speed, using less
ink.

7. Change other printer settings, if needed.
8. Click

Print

Related Information

•

Print from Your Computer (Macintosh)

•

Paper Handling and Printing Problems

•

Change the Print Setting Options When Having Printing Problems

109

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands

Brother MFC-J2330DW, User Manual

Search results

Summary of Contents for MFC-J2330DW

Reviews:

Related manuals for MFC-J2330DW

Brands by name

Popular brands