Troubleshooting
127
B
Toner Error
One or more toner cartridges
are not installed correctly.
Pull out the drum unit. Remove all of the toner
cartridges, and then put them back into the
drum unit.
Toner Low:X
1
(X) indicates the toner
cartridge colour that is
near the end of its life.
BK
=Black,
C
=Cyan,
M
=Magenta,
Y
=Yellow
If the Touchscreen displays
Toner Low
you can still print;
however, the machine is telling
you that the toner cartridge is
near the end of its life.
Order a new toner cartridge for the colour that
is indicated on the Touchscreen now so a
replacement toner cartridge will be available
when the Touchscreen displays
Replace
Toner
.
Too Many Files
There are too many files stored
on the USB flash drive.
Reduce the number of files stored on the USB
flash drive.
Touchscreen
Initialisation
Failed
The Touchscreen was pressed
before the power on
initialization was completed.
Make sure nothing is touching or resting on the
Touchscreen.
Debris may be stuck between
the lower part of the
Touchscreen and its frame.
Insert a piece of stiff paper between the lower
part of the Touchscreen and its frame and slide
it back and forth to push out the debris.
Tray2 Error
The optional lower tray is not
installed correctly.
Reinstall the optional lower tray.
Unusable Device
Remove the
Device. Turn the
power off and back
on again.
A defective USB device or a
high power consumption USB
device has been connected to
the USB direct interface.
Unplug the device from the USB direct
interface. Press and hold down
to turn the
machine off, and then turn it on again.
Unusable Device
A USB device or USB flash
drive that is not supported/is
encrypted has been connected
to the USB direct interface.
Unplug the device from the USB direct
interface (see the specifications for supported
USB flash drives in
drive or digital camera supporting mass
storage
USB
Write-protected
The protect switch of the USB
flash drive is on.
Turn off the protect switch of the USB flash
drive.
WT Box End Soon
The waste toner box is near the
end of its life.
Buy a new waste toner box before you get a
Replace WT Box
message.
Error Message
Cause
Action