Brother MFC-L8650CDW Basic User'S Manual Download

Page: 34 / 259

Chapter 2

Load paper in the MP tray and make
sure:



The paper stays under the maximum
paper tab (1).



The top edge of the paper is

positioned between the and
arrows (2).



The side to be printed on must be
face up with the leading edge (top of
the paper) in first.



The paper guides touch the sides of
the paper so it will feed correctly.

NOTE

When you are using glossy paper, put only
one sheet at a time in the MP tray to avoid
a paper jam.

Lift up the support flap to prevent paper
from sliding off the face-down output
tray, or remove each page as soon as it
comes out of the machine.

Send the print job to the machine.

Summary of Contents for MFC-L8650CDW




































































































































































































































































Search results

Summary of Contents for MFC-L8650CDW

Reviews:

Related manuals for MFC-L8650CDW

Brands by name

Popular brands

Brother MFC-L8650CDW, Basic User'S Manual

Search results

Summary of Contents for MFC-L8650CDW

Reviews:

Related manuals for MFC-L8650CDW

Brands by name

Popular brands