1
2
3
4
5
6
7
8
9
45
z
LA
BEL PRIN
TING
Setting Margin
The tape cutting options allow you to specify how the tape is fed and cut when printing
labels. In particular, the “Chain” options greatly reduce the amount of wasted tape by
using smaller margins and eliminating blank sections cut between labels.
Press the
Label
key to display the Label menu.
Select “Margin” using the or key, and then set the value by using the or
key.
Press the
OK
or
Enter
key to apply the settings.
z
Tape Cutting Options
z
Setting Margin
1
2
3
New settings are NOT applied if you do not press the
OK
or
Enter
key.
• Press the
Escape
key to return to the previous step.
• Refer to the Tape Cutting table for a list of all available settings.
Setting
Description
Example
Full
Each label is printed, leaving a margin of 25
mm on each end.
Half
• A margin of 25 mm is printed first, and then
each label is printed, leaving a margin of 12
mm before and after the text.
• Dots (:) are printed in front of the text. Cut
along the printed dots (:) with scissors.
Narrow
• A margin of 25 mm is printed first, and then
each label is printed, leaving a margin of 4
mm before and after the text.
• Dots (:) are printed in front of the text. Cut
along the printed dots (:) with scissors.
ABC
25 mm
25 mm
ABC
:
12 mm 12 mm
25 mm
ABC
:
4 mm 4 mm
25 mm
Summary of Contents for P-touch 2030
Page 64: ...Printed in China LW6163001A ...
