36
5
Specify the tape width to be used for
printing.
A.If only one printer has been selected
In the dialog box from step
4
, select the
printer whose setting is to be specified,
and then either double-click it or right-
click it and click “Settings”. From the “Set
Width” drop-down list, select the tape
width.
B.If multiple printers have been selected
In the dialog box from step
4
, select the
printers whose setting are to be specified,
and right-click them and click “Settings”.
From the “Set Width” drop-down list,
select the tape width. The same tape
width setting is applied to all selected
printers.
6
Click [OK] to close the tape width setting
window.
7
Click [OK] to close the “Distributed
Printing Settings” window.
Setup is completed.
8
Click [OK] to start distributed printing.
Note
●
Information to be displayed in the dialog
box from step
4
can be entered in the
“Notes” text box.
Note
●
The settings below “Printer Settings” and
“Notes” are not available.
Note
●
If the selected tape width is different from
that displayed beside “Current Width”,
appears beside the setting below
“Current Width”. Load the printer with
tape of the width specified “Set Width”.
●
It may not be possible for information to
be detected for a printer connected using
the PS-9000 or any common USB hub or
print server.
Before printing, enter the settings
manually, and check if the printer can be
used for printing.
●
Depending on whether a router is used
and the security features in use, such as a
firewall, it may not be possible to use this
function.
●
We recommend performing a connection
test for your operating environment. For
more information, contact a sales
representative.
PT9700PC9800PCN_US.book Page 36 Wednesday, October 7, 2009 11:58 AM
Summary of Contents for P-TOUCH 98OOPCN
