LABEL APPLICATION KEYS
Use this function to create a label
that can be wrapped around a
cable or wire.
Turn on the Cable Rotate/Repeat function to print
text repeatedly along the length of the label so
that it can easily be read from any angle.
To activate the Text Repeat function, press
and then select [
CableRot
/
Rpt
].
Cable diameter: 0.2" to 3.6" (3 mm to 90 mm)
Default: 0.3" (6 mm)
Use this function to create a
label that can be wrapped
around a cable or wire with its
ends pressed
together to form a
flag.
Specify the length you want, or select [
Auto
] to
automatically adjust the flag length according to
the text length.
• Flag length: 0.4" to 8.0" (10 mm to 200 mm), Auto
Default: Auto
• Use the Cable Flag function when the diameter
of the object is more than 0.2" (3 mm).
• Text cannot be rotated when using the Cable
Flag function.
NOTE
• We recommend using Brother Flexible ID Tape for labels attached to cables and wires.
• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press
/
or
accordingly.
• Depending on the format you select, the entire contents of your text may not be printed. For example, if the
text is too long to fit into the format, the [
Text Limit
!] error message will appear.
3
Cable Wrap
[
Txt Rpt: Off
]
[
Txt Rpt: On
]
/
(
6HOHFWDFDEOHGLDPHWHU
)
(
(QWHUWH[W
)
Cable Flag
/
(
6HOHFWDIODJOHQJWK
)
(
(QWHUWH[W
)
