NOTE
• The LCD displays one row of 15 characters; however, you can enter up to 80 characters in length.
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Tape Cassette into the P-touch Pro
label maker until it locks into place.
• Make sure your Tape Cassette is marked
.
• Use Brother TZe tapes with this machine.
• Use only tape widths of 0.13" (3.5 mm), 0.23"
(6 mm), 0.35" (9 mm), or 0.47" (12 mm).
• Remove any protective plastic from the Tape
Cassette before inserting it.
Close the Cassette Cover and gently press
until it locks into place.
NOTE
If you prefer to use the optional AC Adapter
(AD-24) instead of using batteries:
1.
Insert the Power Adapter cord into the AC
Adapter Jack on the side of the P-touch
Pro label maker.
2.
Insert the Power Adapter into an AC
electrical outlet.
LCD
1.
Size
2.
Cursor
3.
Shift
4.
Caps
5.
Cable Wrap
6.
Cable Flag
7.
Faceplate
8.
Label Length
If you have selected a specific
label length, appears.
• Label length displayed on the LCD may differ slightly from the actual label length when printed.
Tape Exit Slot
Toothed Wheel
Cutter Edge
End of Tape
Tape Guides
Tape Cutter Lever
3
AC Adapter Jack
Strap
4
1
2
7
6
4
3
8
5
