PD-9810
E-49
Chapter 7 OTHER FUNCTIONS
Comparing the Program
The currently editing data can be compared with the data in the machine or the file in the programmer.
• 9 programs can be all compared.
• The cycle program is excluded from the comparative object.
Programmer
Comparing with the data in the machine
1.
Press the [P] key to start the programmer.
2.
Press the [MENU] key to display the menu screen.
3.
Select the <Program comparison> icon with the [
] key and press the [ENTER] key.
4.
Select the far left key with the [
] key and press the [ENTER] key.
(1) When the program is changed, the changed program No. is displayed.
When the program No. is selected with the [
] key and the [ENTER] key is pressed, the changed
parameter is displayed.
Cycle
program
Machine
File 1
File 2
File 3
Work
Environment
setting
W0020Q
1610Q
1611Q
W0116Q
Summary of Contents for PD-9810
