48
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING
MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
Embroidering multi-color patterns
When a pattern is selected it is broken down into
color diagrams on the screen. The order of
embroidering is shown left to right. The diagram
on the left is for the first thread color.
1. Thread the first color. (See page 16 – 17)
When the “START/STOP” button is pressed,
the first part of the pattern (1) will be sewn
and then the machine will stop automatically.
*
Be sure to raise the presser foot before
changing the thread.
*
When embroidering is completed for this
color, the screen display will automatically
move to the left one position.
2. Replace the upper thread with the next color
and press the “START/STOP” button. The
second part of the pattern (2) will be
embroidered and the machine will then stop
automatically.
3. Replace the upper thread with the next color
and press the “START/STOP” button. The
third part of the pattern (3) will be
embroidered and the machine will then stop
automatically.
4. Trim any excess thread.
SEWING A BASIC EMBROIDERY PATTERN
Embroidering single color patterns
1. Thread the machine. (See page 16 – 17)
2. Install the embroidery frame. (See page 20 – 22)
3. Lower the presser foot.
4. Press the “START/STOP” button to sew the
pattern: the machine will stop automatically
when it is finished.
5. Raise the presser foot.
6. Trim any excess thread.
(1)
(2)
(3)
(2)
(3)
(3)
