52
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING
MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
Embroidering appliques (using a frame pattern)
1. Select the applique fabric for the project, attach a stabilizer
material, place in the embroidery frame and on the machine.
2. Select the frame shape to be embroidered and the “– – –”
stitch. Embroider it onto the applique fabric. Remove the
fabric from the frame.
Cut neatly around the outside of the shape made by the
stitches.
3. Attach a stabilizer material onto the back of the fabric on the
project where the applique is to be placed. Center the area
where the applique is to be placed in the embroidery hoop.
Embroider it in the same way using the same frame pattern
shape and “– – –” stitch as in step 2.
1
4. Apply a thin layer of fabric adhesive to the rear of the
applique which is created in step 2, and then attach it to the
base fabric so that it follows the frame shape just stitched.
1
Adhesive
1
5. Without changing the frame shape or size, select the “
”
stitch, and use it to embroider the applique material onto the
project.
1
Satin stitch “
”
The finished applique on the project
