manualshive.com logo in svg

Brother PE-Design 6, Instruction Manual

The Brother PE-Design 6 is a user-friendly embroidery software that allows you to create beautiful designs with ease. With its extensive range of features and functionalities, this software is perfect for both beginners and experienced embroiderers. The detailed Instruction Manual can be downloaded for free from 88.208.23.73:8080, providing step-by-step guidance for optimal usage.

Share
Download
background image

261

Index

on card  ............................24, 52, 62, 195, 196, 206
stitch patterns  ..............................................58, 221

scaling

display area frame .....................................104, 193
embroidery patterns  ....................................40, 132
images ...................................................21, 27, 114
objects .................................................................42
outlines ................................................................79
stitch patterns  ............................................214, 220

searching ...................................................................229
selecting

all embroidery patterns ......................................130
all stitch patterns  ...............................................213
characters .........................................................157
colors .................................................................119
embroidery patterns  ..........................................130

in sewing order  ..........................................130

entry/exit points  .................................................141
monogram characters  .......................................164
outlines ................................................................78
patterns .............................................................184
points .................................................................135
sewing area  .......................................................183
stitch patterns  ....................................................213

Sew

Applique Wizard  ........................................181, 247
Cancel Hole Sewing  ....................................51, 180
Cancel hole sewing  ...........................................246
Convert to Stitch ........................................140, 246
Optimize Entry/Exit points  .................138, 139, 247
Optimize hoop change  ..............................204, 247
Select Sewing Area  ...................................183, 247
Set Hole Sewing ..........................................51, 180
Set hole sewing  .................................................246
Setting Attribute ...........................................89, 171
Sewing Attribute Setting  ..............................46, 246
Sewing Attributes  ..............................................238
Sewing Order  ......................................49, 100, 238
Sewing Order/Color ...........................142, 184, 246
Stitch to Block  ...........................................142, 246

Sew menu

Design Center  ...................................................238
Layout & Editing  ................................................246

Sew Page Color  ........................................................118
Sew Setting stage  .............................................4, 34, 69

Tool Box buttons  ...............................................235

Sew type selector  ................................................89, 170
sew types  ....................................................................15
sewing attributes  .......................................................167

concentric circle stitch  .................................95, 177
cross stitch  ..................................................95, 177
E/V stitch  ...........................................................173
fill stitch  .......................................................92, 174
lines .....................................................................86
motif stitch  ...........................................95, 172, 177
outline ..................................................................85
piping stitch  .......................................................178
programmable fill stitch  ...............................93, 175
radial stitch  ..................................................95, 177
regions ................................................................84
running stitch  ...............................................91, 172
satin stitch  ...................................................91, 173
setting ....................................................34, 89, 171
spiral stitch  ..................................................95, 177
zigzag stitch  ................................................91, 172

Sewing Attributes bar  ..................................................87
sewing direction .......................36, 47, 91, 92, 93, 94, 95

programmable fill stitch  ...............................96, 178
stamp ................................................................178
tips .......................................................................14

Sewing Option  ...................................118, 121, 123, 125
sewing order ..........................................49, 61, 100, 184

editing ................................................................185
tips .......................................................................14

sewing wide areas .......................................................14
Size .....................................................................95, 177
slot .................................................................................6
special colors .............................................................170
spiral stitch  ..................................................................16

sewing attributes  .........................................95, 177

splitting stitching  ........................................................143
stabilizer ......................................................................63
Stage

To Figure Handle  ..................................33, 76, 239
To Line Image  .......................................31, 73, 239
To Original Image ..............................................239
To Sew Setting  ............................................34, 239

stage 1 .....................................................................4, 69
stage 2 .........................................................4, 31, 69, 73

Tool Box buttons  ...............................................234

stage 3 .........................................................4, 33, 69, 76

Tool Box buttons  ...............................................234

stage 4 ...............................................................4, 34, 69

Tool Box buttons  ...............................................235

Stage menu  ...............................................................239
stamp attributes .........................................................165
stamps .........................................................98, 165, 217

editing ..................................................................99

starting

Design Center  .....................................................30
Design Database ...............................................224
Layout & Editing  ......................................19, 25, 59
Programmable Stitch Creator ..............................54

Step Pitch  ..............................................92, 94, 175, 176
stitch

interval ...............................................................173
run pitch  ............................................................173
stroke width  .......................................................173

stitch data

from objects .......................................................140
to blocks  ............................................................142

stitch patterns

copying ..............................................................214
creating .............................................................218
cutting ................................................................214
deleting ..............................................................214
drawing ..............................................................212
duplicating .........................................................214
editing ........................................................213, 219
feathered edge  ..................................................178
flipping .......................................................215, 220
height ............................................94, 95, 172, 177
motif stitch  ...........................................95, 172, 177
moving ...............................................................213
pasting ...............................................................214
previewing .........................................................212
programmable fill stitch  ...................47, 55, 94, 176
resizing ......................................................214, 220
rotating ..............................................................215
saving ................................................................221
scaling .......................................................214, 220
selecting ............................................................213
width  ......................................94, 95, 172, 176, 177

stitch points

deleting ..............................................................141
editing ................................................................140
inserting .............................................................141
moving ...............................................................141

stitch simulator  ..................................................101, 188

PeDesignV6Eng.book  Page 261  Thursday, July 8, 2004  11:59 AM

Summary of Contents for PE-Design 6

















































































































































































































































































Reviews:

No comments

Related manuals for PE-Design 6

Samsung Lazett Combo SCX-4116 User Manual preview
Lazett Combo SCX-4116
Brand: Samsung Pages: 165
Samsung ML 1630 - B/W Laser Printer Manual preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 18
Waves API 550 User Manual preview
API 550
Brand: Waves Pages: 20
Omron WS02-NCTC1-E - 07-2001 Operation Manual preview
WS02-NCTC1-E - 07-2001
Brand: Omron Pages: 116
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 4.0 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 4.0
Brand: Red Hat Pages: 92
NAPCO BADGING3000 Datasheet preview
BADGING3000
Brand: NAPCO Pages: 2
Xerox Phaser 340 Installer Installation preview
Phaser 340 Installer
Brand: Xerox Pages: 2
Pioneer CNSD-239FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-239FM
Brand: Pioneer Pages: 28
Pioneer CNSD-230FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-230FM
Brand: Pioneer Pages: 28
Siemens IEEE802.11 Tutorial preview
IEEE802.11
Brand: Siemens Pages: 84
M-Audio Jamlab User Manual preview
Jamlab
Brand: M-Audio Pages: 15
Autodesk AUTOCAD MECHANICAL Brochure preview
AUTOCAD MECHANICAL
Brand: Autodesk Pages: 4
IBM Hub/Switch Installation Manual preview
Hub/Switch
Brand: IBM Pages: 590
Xilinx LogiCORE Endpoint v2.4 User Manual preview
LogiCORE Endpoint v2.4
Brand: Xilinx Pages: 172
KAPERSKY SECURITY - FOR PDA 4.5 User Manual preview
SECURITY - FOR PDA 4.5
Brand: KAPERSKY Pages: 137
IBM VIAVOICE 10-PRO USB EDITION User Manual preview
VIAVOICE 10-PRO USB EDITION
Brand: IBM Pages: 160
F-SECURE Mobile Security 2010 Manual preview
Mobile Security 2010
Brand: F-SECURE Pages: 20
FARONICS DEEP FREEZE ENTERPRISE Maintenance Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 6

Brands by name

Popular brands

Load more brands