ADVANCED EMBROIDERY
127
3
■
Repeatedly embroidering a pattern along a
diagonal
Example
a
Touch
in the embroidering settings screen to
display the starting/ending position settings screen.
b
Select .
c
Specify the upper-left corner as the starting position
and the lower-right corner as the ending position.
For the starting position, touch
so that it changes to
.
For the ending position, touch
so that it changes to
.
Touch
to close the starting/ending position
settings screen.
d
Embroider the first pattern.
Touch
to display the embroidering screen, and
then touch
and press the “Start/Stop” button.
1
Starting position
2
Ending position
e
After embroidering is finished, the machine stops at the
lower-right corner of the pattern.
f
Touch
and repeat steps
d
and
e
three
times.
Note
• If the next embroidery pattern of the series will be
stitched outside the embroidery field, the message
to inform you that it cannot set the starting/ending
position will appear.
Rehoop the fabric to continue to repeat the
embroidering pattern. Touch
and repeat
steps
d
and
e
.
Memo
• If the starting position and ending position settings
are changed, instead of embroidering the patterns
in a fixed direction, various pattern designs are
possible.
