PREFACE
This publication is a service manual covering the specifications, theory of operation,
disassembly/reassembly procedure, and troubleshooting and error message of the Brother PT-
9500PC. It is intended for service personnel and other concerned persons to accurately and quickly
provide after-sale service for our PT-9500PC.
To perform appropriate maintenance so that the machine is always in best condition for the
customer, the service personnel must adequately understand and apply this manual.
This manual is made up of four chapters and appendices.
CHAPTER I
SPECIFICATIONS
CHAPTER II
THEORY OF OPERATION
CHAPTER III
DISASSEMBLY AND REASSEMBLY
CHAPTER IV
TROUBLESHOOTING AND ERROR MESSAGE
APPENDIX
1. TEST SOFTWARE OPERATION
2. MAIN PCB CIRCUIT DIAGRAMS
©
Copyright Brother 2003
All rights reserved.
No part of this publication may be reproduced in any
form or by any means without permission in writing
from the publisher.
Specifications are subject to change without notice.
Summary of Contents for PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer
