III-18
(3)
Take the AV sensor actuator and the AV sensor spring off the main frame along the shaft slot
shape of the main frame.
(4)
Remove the AV sensor spring from the AV sensor actuator.
Fig. 3.1-28 Removing the AV Sensor Actuator/AV SW Sensor ASSY (2)
(5)
Remove two screws from the head/roller holder unit and remove the unit pushing from the
backside of the roller holder.
Fig. 3.1-29 Removing the Head/Roller Holder Unit
AV sensor actuator
AV sensor spring
Main frame
Screws
Head/roller holder unit
Main frame
1
2
Summary of Contents for PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer
