III-36
[ 8 ]
Reassembling the Cassette Cover Bracket
(1)
Mount the damper on the cassette cover bracket and secure it with two screws.
Fig. 3.1-64 Reassembling the Cassette Cover Bracket (1)
(2)
After fitting the cassette open spring on the boss of the cassette cover bracket, bend the
spring toward the arrow direction and clamp it by the rib.
Fig. 3.1-65 Reassembling the Cassette Cover Bracket (2)
Cassette cover bracket
Damper
Cassette cover bracket
Rib
Cover open spring
Boss
Screws
1
2
3
Summary of Contents for PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer
