1
APPENDIX 1.
TEST SOFTWARE OPERATION
This software has the feature to align and examine every component mounted on the mechanical
component or the main PCB ASSY when it is replaced, and the capability to write the information such
as the model name and serial number into the EEPROM mounted on the main PCB.
<Operation Procedure>
(1) Connect the PC and the PT-9500PC with the interface cable. (Use this software on the PC
having the serial port).
•
Do not connect to the USB port.
•
This software can run on the PC running Windows 98 or Windows 2000 and the serial
connection.
•
Use the serial IF cable supplied with the PT-9500PC.
•
Install the appropriate driver in advance.
•
Place PT95Service.exe and inspection pattern.prn in the same directory.
(2) Input the DC voltage (24V
±
0.1V) from the stabilized power supply through the DC jack of the
PT-9500PC.
(3) Turn on the power supply button of the PT-9500PC after confirming up and run of the OS on
the PC.
(4) Launch the software dedicated to PT-9500PC serviceman (File name: PT95Service.exe).
Fig. 1
Summary of Contents for PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer
