S-7220C
2. INSTALLATION
9
(1) 6-pin head detector unit connector
Raise the tab (6).
Lower the tab (6).
Push in securely until the tabs (6) engage.
4139M
(2) 12-pin operation panel connector
(3) 10-pin resolver connector
(4) 14-pin machine connector
(5) 4-pin motor connector
2. Binding the cords
(1) Repeat cable tie
NOTE:
Bind the cords in such a way that the
connector does not get pulled out.
All cords that come out from the
control box should be secured to the
cord holder (2) using the repeat
cable tie (1), otherwise vibration from
the sewing machine may cause the
cords to become disconnected,
which can cause problems with the
operation of the control box.
4140M
Cords
Press
the tab.
<Securing>
<Removal>
4141M
<Closing the cover>