Chapter 2
16
2
While lifting up the media guide
adjustment lever (1), push in
both media guides (2) to fit the
width of the paper.
3
Feed the end of the RD Roll
under the media tip guides (1).
4
Position the end of the paper
centered over the platen roller
and slightly out of the media
exit.
5
Close the RD Roll compartment
top cover by pressing it in the
center.
Press down until it snaps into
place.
For fanfold paper
1
Insert the fanfold paper in the
direction shown.
1 Print side
1
2
1
1
