Configuration methods
15
2
Manual configuration for a Wi-Fi Direct network
2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a
Press .
b
Press
Wi-Fi Direct
.
c
Swipe up or down, or press
a
or
b
to display
Manual
.
Press
Manual
.
d
When
Wi-Fi Direct On?
is displayed, press
On
to accept.
To cancel, press
Off
.
e
The machine will show the SSID name and Password for two minutes. Go to the wireless network
settings page of your mobile device and input the SSID name and password.
f
If your mobile device connects successfully, the machine shows
Connected
.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see