193
ZE-855A,856A
14. OPTIONAL PARTS
14. SONDERZUBEHÖRTEILE
14. PIECES EN OPTION
14. PARTES OPCIONALES
■
Operating the reflection pattern switch
Using the reflection pattern switch allows the following to be carried out.
•
In addition to scallop patterns, 2-step zigzag, 3-step zigzag (with no zigzag stop position set), blind stitch and custom
made patterns can also be sewn as reflection patterns.
•
In addition, correction sewing can also be carried out using the actuator while the above reflection patterns are
being sewn.
<Sewing reflection patterns>
For scallop patterns, select
AA AA
or
AA AA
as the pat-
tern number instead of
AA AA
or
AA AA
.
1. While sewing is in progress, stop the sewing machine
at the sewing start position for the reflection pattern.
2. Press the reflection pattern switch
q
.
The indicator
w
will illuminate.
* If you press the reflection pattern switch
q
by mis-
take at any time, press the reflection pattern switch
q
once more. The indicator
w
will then switch off.
3. Depress the treadle to sew the reflection pattern.
4. While the reflection pattern is being sewn, stop the
sewing machine at the sewing start position for the
original pattern.
5. Press the reflection pattern switch
q
.
* The indicator
w
will switch off and reflection pat-
tern sewing will be canceled.
6. Depress the treadle to continue sew the original pat-
tern.
• In this way, you can alternate between sewing the
original pattern and sewing a reflection pattern by
turning the indicator on and off. During this time,
the pattern changeover points are where reflection
occurs as shown in the illustration.
q
w
<Example: Custom made pattern>
Sewing
direction
Indicator off
(original pattern)
Reflection pattern
switch is pressed
Reflection
pattern
Reflection
pattern
Indicator on
(reflection pattern)
Reflection pattern
switch is pressed
Indicator off
(original pattern)
1398M
1399M
