background image

6  Installation

This chapter helps you with the installation and commissioning of the 

thermostat.

 Next chapter: Troubleshooting, page 42
 Previous chapter: Messages and data, page 35
 First chapter: Manual menu, page 5

6.1 

System overview

6.1.1 

Systems with gateway

The IDA can be connected to three types of appliances (based on the 

communication protocol):

On/off protocol

OpenTherm protocol

BSB protocol

The communication protocol depends on the type of appliance used in 

your system. Consult your installer for technical details about your 

appliance and information how to connect the IDA with the appliance. You 

can connect the IDA yourself, or ask your installer.

For more information, see

Setup procedure, page 41

6.1.2 

System without gateway

Appliances with built-in gateway are available. The IDA can be directly 

connected to the appliance.

See

The website of the manufacturer to find information about the 

available appliances.

6.2 

Standard delivery

Tab.10 IDA package

IDA room thermostat
Mounting bracket
Fasteners
Plug fittings
Quick reference guide

Tab.11 IDA and gateway package

IDA room thermostat
Mounting bracket
Fasteners
Plug fittings
Quick reference guide
Gateway
230V Power supply
Installation instructions

6.3 

Preparation

You must check which gateway is needed for the communication between 

the IDA and your appliance.

AD-3001027-01

Fig.63

AD-3001129-01

R-bus

Fig.64

AD-3001130-01

R-bus

Fig.65

AD-3001131-01

Fig.66

AD-3001132-01

6  Installation

7726708 - v.01 - 18012019

39

Summary of Contents for IDA

















































Reviews: