background image

3. Confirm the selection.

4. Select Edit.

5. Confirm the selection.

6. Change the period and/or temperature.

7. Select Save.

8. Confirm the change.

Changing the holiday schedule via the quick access menu

1. Long-press the Select button to enter the quick access menu.

2. Select Holiday.

3. Confirm the selection.

4. Select Edit.

5. Confirm the selection.

6. Change the period and/or temperature.

7. Select Save.

8. Confirm the change.

3.6.3 

Deleting a holiday schedule

You can delete the holiday schedule via the main menu and via the quick 

access menu.

Deleting the holiday schedule via the main menu

1. Enter the main menu.

2. Select Input Holiday Period.

3. Confirm the selection.

4. Turn the rotary dial to the left to select Clear.

5. Confirm the selection.

Deleting the holiday schedule via the quick access menu

1. Long-press the Select button to enter the quick access menu.

2. Select Holiday.

3. Confirm the selection.

4. Turn the rotary dial to the left to select Clear.

5. Confirm the selection.

3.7 

Activating fireplace mode

Fireplace mode enables you to continue heating other rooms that are 

controlled by your system while another heat source heats the room where 

the IDA is. For instance a fire lighted in your fireplace or a large number of 

people can heat the room so much, that the appliance stops heating all the 

rooms.

Important

Activate the Fireplace mode before the other heat source 

becomes active.

1. Enter the main menu.

2. Select Enable Fireplace.

3. Confirm the selection.

The fireplace icon appears in the top right corner of the main 

screen.

Important

You can switch off fireplace mode by selecting Fireplace disabled 

in the main menu.

3.8 

Activating antifrost mode

You can activate the antifrost mode for central heating and domestic hot 

water production, when you will be out of the house in winter for a longer 

period of time. The heating system will keep the temperature just high 

enough to avoid frost damage and thus save the maximum amount of 

energy.

3  General use

7726708 - v.01 - 18012019

19

Summary of Contents for IDA

















































Reviews: