BW1254 User Guide v1.0
Nov. 2013
Page 9 of 184
This chapter provides installation instructions for the hardware and software components of the
Access Point BW1254. It also includes the procedures for the following tasks:
Hardware Introduction (LEDs, Connectors)
Connecting the Access Point
Software
Installation
The Product Package
The product comes with the following:
Dual Radio 802.11a/n+b/g/n Indoor Access Point (model: BW1254)
Screw Bag(wall mounting)
Antenna (Dual-band Dipole Antennas with RP-SMA connector, 4 units)
Ethernet patch cable (Cat5 UTP, 1.5m length, 1 unit)
External power supply (Input:100-240VAC, 50-60Hz, Output: 48VDC/0.5A, 1 unit)
Hardware Introduction
General Overview
Figure 1 – BW1254 General View
Front panel
There are five indicator lights (
LEDs
) that help to describe the state of various networking and
connection operations.
Figure 2 – BW1254 led indication
Chapter 2 - Installation