BW1254 User Guide v1.0
Nov. 2013
Page 149 of 184
Mode
– select whether the system mode of BW1254 is AP mode or AP Router mode
IP
– specify the IP address of current interface [dots and digits]
Netmask
– specify the subnet mask of current interface [dots and digits]
Gateway
– specify the gateway to other networks
Protocol
– specify
static
for setting IP address manually and
dhcp
for getting IP address dynamically
acting as DHCP client
Apply and Reboot
– click the button to restart the device and apply all setting changes
The Web Interface in AP-Router mode is different from that in AP mode. For the
detailed configuration of BW1254 working in AP mode, please refer to:
Chapter 3 –
Reference Manual----AP Mode
System | System Info
Administrator can self-define the device information including the system name, system location and
system contact information of his BW1254.
Figure 269 – System info Settings
System Name
–edit the system name, the column length range is 1 to 255.
Figure 270 –edit the system name
System Location
– edit the system location, the column length range is 1 to 255.
Figure 271 –edit the system laocation
System Contact
– edit the system contact, the column length range is 1 to 255.
