No. 330550
─ USER MANUAL ─
FIRE TRIPOD WITH SPINNING WHEEL
Dear Customer!
Thank you for choosing a BROWIN fire tripod with spinning wheel.
Bearing in mind the safety and full satisfaction with the use of this product, please read this
instruction manual thoroughly and keep it for the future.
I.
General information
The tripod is designed to support a grill/cast iron kettle over a fire pit. The device is equipped
with a steel line and manual spinning wheel.
The user is obliged to take all necessary measures to ensure safe operation of the product ant
to prevent all life and health hazards of both the user and third parties.
II.
Operating conditions
Set the tripod over the fire pit
– on a flat, hard and non-flammable substrate.
Suspend the grill.
Inspect stability of the structure.
III.
Recommendations concerning safe use:
Before you start using the tripod check, if the structure has been properly
assembled.
Special attention should be paid so that the weight of the products does not exceed
the maximum lifting capacity of the device.
It is forbidden to use a non-operational tripod.
During operation, special care should be taken and fire safety regulations should be
observed. It is recommended to possess a working fire extinguisher.
In the case of faults being noticed, further use of the device should be stopped.
IV.
Technical characteristics:
The tripod is made of S235JR steel covered with heat-resistant paint.
Maximum lifting capacity: 40kg
