background image

2

3

i n s P e C t i n g   y o u r   s a f e

Upon receipt of your safe, you should immediately inspect it for any 
damage that may have occurred during shipping. If your safe was 
commercially delivered and you detect any damage, call the shipping 
company that delivered your safe and report the damage. 

IMPORTANT: Any damage, concealed or otherwise, not noted on the 
delivery receipt must be reported to the shipping company within 15 
days of delivery.

Your safe comes bolted to its shipping pallet. You will need to remove 
the black plastic covers in the safe floor to access the bolts. Use a ½" 
socket wrench to remove the bolts.

The safe door is heavy. do noT open The safe while locaTed on 
an uneven or unsTable floor or on plush carpeT. The weighT of 
The open door could cause The safe To Tip forward. see 
insTrucTions on page 8 for “anchoring your safe.” failure To 
follow This warning could resulT in serious injury or deaTh.

u l   t o o l   a t t a C k   l i s t i n g

Browning ProSteel safes carry the UL tool attack label certifying  
the design and construction have been tested by Underwriters 
Laboratories® and passed the Residential Security Container  
test specifications.

f i r e   P r o t e C t i o n   r a t i n g

Browning ProSteel fire safes carry a fire rating to help you compare the 
different levels of fire resistance offered. To develop the fire ratings, 
safes are subjected to a rigorous fire test. Sample safes are placed in a 
gas furnace and heated for the amount of time stated to the peak 
temperature in the rating. Temperatures are monitored in several 
locations throughout the safe. In order to pass the test, the safe interior 
temperature must not exceed 350° F in any sensor location.

t h a n k   y o u   f o r   P u r C h a s i n g   a   

B r o w n i n g   P r o s t e e l   s a f e .

A Browning ProSteel safe is the finest home security safe available. With 
proper care and installation it will provide you many years of peace of 
mind, security and fire protection (fire-resistant models only). 

Your Browning ProSteel safe is a security safe designed to protect your 
valuable personal property from theft by increasing the time it takes for 
a thief to access your valuables. Most successful burglaries occur within 
minutes of a criminal entering a home or business. A security safe slows 
down a criminal and makes it more difficult to access your valuables 
quickly. Your Browning ProSteel safe is the most cost-effective deterrent 
to theft available on the market today. DO NOT HOWEvER, ASSUME 
THAT ANY SAFE IS IMPENETRABLE — IT IS NOT! A 
KNOWLEDGEABLE THIEF CAN GET INTO ANY SAFE IF GIvEN 
THE APPROPRIATE TOOLS AND ENOUGH TIME. Your safe is a 
deterrent and a delaying device. You can make it even more effective by 
placing it in the right location and anchoring it to the floor and wall.

Browning ProSteel fire safes offer similar protection against fire. They 
are fire-resistant, not fireproof. DO NOT ASSUME A FIRE-RESISTANT 
SAFE WILL WITHSTAND ANY AND ALL FIRES — IT WILL NOT. 
Browning ProSteel fire-resistant safes are evaluated in a controlled 
test environment to assure that the safe’s interior temperature does 
not exceed 350° F for the amount of time and temperature exposure 
as stated on the door label placed on each safe. Different models of 
Browning ProSteel safes have different fire ratings, and a longer time 
rating indicates more fire resistance compared to a safe with a shorter 
rating. You can improve your fire-resistant safe’s ability to protect your 
valuables from fire by placing it in an appropriate location in your 
home. Follow the instructions under “Placement of Your Safe” on 
page 4. A safe is just one part of protecting your valuables. Adequate 
homeowner’s insurance coverage should also be maintained.

07-137-BSF_Safe OM.indd   2-3

7/21/08   11:13:08 AM

Summary of Contents for 07-137
















Reviews: