Thank you for choosing an IntelliGear Plus Gearmotor.
•
Periodic inspections should be performed. Failure to
perform proper maintenance can result in premature
product failure and personal injury.
•
Avoid contact with capacitors until safe discharge
procedures have been completed.
•
All electrical work should be performed by qualified
personnel and be compliant with local and national
electrical codes.
•
Read and follow all instructions carefully.
•
Disconnect and lock-out power before installation and
maintenance. Working on or near energized equipment
can result in severe injury or death.
•
Avoid contact with energized circuits or rotating parts.
•
High voltage and rotating parts can cause serious or fatal
injury.
•
Do not operate equipment without guards in place.
Exposed equipment can result in severe injury or death.
•
Be sure shaft key is fully captive before unit is energized.
•
Most units are shipped with oil. Always be sure oil
lubricated units are filled with correct oil to proper level
before operating.
•
Avoid extended exposure to equipment with high noise
levels.
2
MCIM15100E • Form 9112E • Printed in USA
