6
Single Position
The Torq/Gard
®
clutch always resets in the same position when tripped. All Torq/Gard clutches are fully reversible.
Lubrication
The Torq/Gard clutch is factory lubricated with Mobilith
®
AW2 and does not require additional lubrication for
years, under normal operating conditions. Clutches used in extreme operating applications may be opened for
regreasing. Open clutch for greasing by removing torque adjusting nut, detector system, cover bolts and then
tap hub end opposite cover with a soft hammer. Do not pry open at cover split line. Apply grease to hub bearing
journals, hub cam track, follower, thrust washer surfaces and all needle bearings.
Mobilith is believed to be the trademark and/or trade name of
Exxon Mobil Corporation and is not owned or controlled by
Regal Beloit Corporation.
