IMPORTANT NOTICE
IMPORTANT NOTICE
This bulletin must be used in conjunction with the
PREDELIVERY CHECK LIST
enclosed in the shrink
pack.
WARNING
To obtain limited warranty coverage, predelivery procedures must be performed by an autho-
rized Sea-Doo watercraft dealer/distributor. Apply all necessary torques as indicated.
— The information and components/system descriptions contained in this document are correct at the
time of publication. However, BRP maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on products previously manufactured.
— Due to late changes, there might be some differences between the manufactured product and the
descriptions and/or specifications in this document. BRP reserves the right at any time to discontinue or
change specifications, designs, features, models or equipment without incurring obligation.
— The illustrations in this document show the typical construction of the different assemblies and may
not reproduce the full detail or exact shape of the parts; however, they represent parts that have the
same or similar function.
— The content of this bulletin is designed as a guideline only. All mechanics performing predelivery pro-
cedures should have attended the current model year service training.
— Further information or inquiries should be directed to your distributor service representative and/or
specific
SHOP MANUAL
sections.
— Please complete the
PREDELIVERY CHECK LIST
for each watercraft and retain a purchaser signed
copy.
— Make sure the purchaser receives the
OPERATORS GUIDE
,
PREDELIVERY CHECK LIST
signed copy
and
SAFETY DVD
.
WARNING
Torque wrench tightening specifications must be strictly adhered to. Where specified, install new
locking devices (e.g. lock tabs, elastic stop nuts). If the efficiency of a locking device is impaired,
it must be renewed.
2 / 23
2009-3
PREDELIVERY
