113
FUEL SYSTEM
CARBURETOR SERVICE
6
Inspect needle valve seat. Replace carburetor
body if worn or damaged.
Inspect jet and nozzle.
Inspect needle valve assembly. If broken tips or
wear are found, replace assembly.
Inspect the float.
Inspect the auto-enrichener needle valve. If bro-
ken tip or wear is found, replace the auto-
enrichener.
Connect the auto-enrichener leads to a 12 V bat-
tery:
•
Check that the PTC heater area is heated 5
minutes after battery has been connected.
IMPORTANT:
Do not attempt to disassemble
the auto-enrichener.
004669
004670
004671
004672
1.
PTC heater
004674