165
POWERHEAD
CRANKSHAFT, PISTONS AND CAMSHAFT
7
Install the idle gear shaft and washer.
Turn crankshaft and camshaft into positions
shown.
Turn the no. 1 idle gear clockwise, then insert pin
from Gear Alignment Pin Set, P/N 5037488,
through the holes in both gears as shown.
Install the idle gear. Check that aligning marks on
all three gears match as shown.
Install cylinder heads and bottom crankcase.
Refer to
When bottom crankcase has been installed, check
that marks on idle gear and camshaft are still in
alignment.
Remove alignment pin tools.
1.
Shaft
2.
Washer
005703
005759
1.
Alignment pin
005760
2
1
1
1.
Alignment marks
005761
1.
Alignment marks
005762
1.
Alignment pins
005763
1