BRP-Rotax
REPAIR MANUAL
Points of inspection
Interval
Operating
hours
Chapter
Reference
Inspection, remedial action
as indicated
4) Fuel system
Inspect fuel filter for dirt, replace if
required.
Inspect before
every operation
of vehicle
Inspect fuel screen from the
carburetor.
Every 10 hours
of operation
5) Exhaust system
Inspect exhaust system for sealing
and tightness, lubricate with oil to pre-
vent corrosion.
Inspect before
every operation
of vehicle
Replace the silencer matting in the ex-
haust system.
Every 10 hours
of operation
6) Outlet control
Clean the exhaust valve and check for
free movement.
Every 10 hours
of operation
7) Gearbox
Check the oil level, top up if necessary.
Every 2 hours of
operation
Renew gear oil.
Every 5 hours of
operation
8) Starter drive
Inspect for wear, replace if necessary.
Every 50 hours
of operation (de-
pending on the
conditions of
use)
9) Clutch
Inspect clutch drum needle bearing for
wear, replace if necessary.
Every 10 hours
of operation
Clean the sealing groove in the starter
gear assy.
Every 10 hours
of operation
10) Engine inspection
Engine inspection by authorized serv-
ice center, replace defective parts.
Every 50 hours
of operation
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Page 11
November 01 2021
Summary of Contents for Rotax 125 JUNIOR MAX evo
Page 174: ......
