25
DUAL 2 manual EN version 7 February 2020
Line length checks
8. Technical data
8. Technical data
All measures are in mm, with 50N line tension, this tension being slowly and gradually applied before taking the
measurement. The lengths include the risers.
During the EN certification process, the test team has checked the lengths of the suspension lines, control lines and
risers given in the manual against the sample glider, after the test flights have been carried out. The difference in
length between the manual and the sample may be no more than 10mm.
The actual measurements for the wings tested during EN certification can be found in the Appendix of this manual.