©2008,
2007 B
runo Independent Living Aids, Inc.®
SRE-2010 Operator 03-20-2008
10
OPERATION
The SRE-2010 includes a
“
soft-start
” feature which
prevents the unit from moving
abruptly the instant the
UP/DOWN switch is pressed.
Press and hold the switch for
a moment to begin the gentle
acceleration of the stairway
elevator to operating speed.
1. Position yourself in the seat.
2. Fasten the positioning belt.
3. Raise and hold the seat swivel lever.
4. Rotate the seat so that you are at right
angles to the rail (with your back to the
stairway wall).
5. Release the seat swivel lever to secure
the seat in that position.
A safety switch prevents operation of the
SRE-2010 unless the seat is locked in
position at right angles to the rail (the
“riding” position).
6. Position both feet securely on the foot-
rest and place your arms on the armrest
cushions.
7. Press and hold the rocker switch (located
on the front edge of one of the armrests)
to travel UP / DOWN the rail.
Depressing and holding the
rocker switch will cause the
carriage to move until the
carriage stops automatically at
the upper or lower end of the
stair rail, or until the switch is
released.
Summary of Contents for SRE-2750
Page 23: ......
