T:\LWG_PG1\Lieferanten\CMEC MACHINERY&ELECTRIC_5005\Bedienungsanleitungen\Standlupe\EN Bedienungsanleitung_150980.1000_Standlupe FUTURO
LED.docx
Instructions for assembly
Remove the stand magnifying glass from its packaging and place it on a flat
surface.
Check all parts.
Adjust the neck and the inclination of the lamp in the desired position.
Connect the power supply to the lamp cable, plug the power supply into the
power point (100-240V) and turn on the lamp.
Warnings for safe operation:
Never look directly into the LED light (risk of eye injury)
Never operate the lamp without installed LED protection cover
Never disassemble or modify the device
Protect the device against liquids and moisture
Keep device away from flammable materials
Keep device away from curtains, fabrics and similar materials
Keep device away from direct sunlight (cover magnifying glass when not in use)
Protect device against mechanical damage
Disconnect the device immediately from the circuit in case of overheating -
detach the mains plug
Do not touch the lamp head or housing in case of overheating
Do not tilt the lamp backwards
Dispose of the device properly
