Eshop:
Email:
w
w
w
.e
M
A
R
eg
.c
z
15
The hold feature freezes the dis play for later view. Press the
button momentarily to
toggle the hold feature.
Relative Zero allows the user to offset the meter consecutive measurements with the
displaying reading as the refere nce value. Practically all displaying readings can be set as
relative reference value including MAX/MIN /AVG feature readings. Press the
button for
one second or moreto toggleRelative Zero mode.
For most auto ranging functions (LCD
turns on by default), press the
button
momentarily to select manual ranging override. The meter will remain in the range it was in,
the LCD
turns off. Press the button momentarily again to select the next range. Press
and hold the button for 1 second or more to resume autoranging.
Note: Manualranging feature is not available to AutoV, Capacitance & Hz functions.
meter due to improper connections to the
A, mA, or A input jacks when another function,
especially a voltage function, is selected.
The AutoPoweroff (APO) mode turns the meter off automatically to extend battery life after
approximately 32 minutes of no specified activities, where applicable:
1) Rotary switch or push button operations
2) Significant measuring readings of above 8.5% of ranges
3) NonOL readings forResistance, Continuity or Diode function
4) Nonzero readings for Hz function
5) Electric field signal present for EF function
6) Significant movement indication as in Phase Rotation functions
In other words, the meter will intelligently avoid entering the APO mode when it is under
normal measurements. To wake up the meter from APO, press the
button
momentarily and release, or turn the rotary switch OFF and then back on. Always turn the
rotary switch to the OFF position when the meter is not in use
To avoid electrical shock, disconnect the meter from any circuit, remove the test leads from
the input jacks and turn OFF the meter before opening the case. Do not operate w
ith open
case. Install only the same type of fuse or equivalent
