Required equipment for operation
1
.
Tools required for building and maintenance:
Hobby knife
Flat and Philips screwdriver
Needle nose pliers
Lexan scissors
Cross wrench
Thread locking compound
Hex wrench
WARNING!
Do not use a power screw driver to install screws into nylon or plastic materials.The fast
locking may heat up the screws being installed that may break the molded parts or
strip the threads during installation.
2.Additional items needed for operation:
Check all the screws are tight before playing the vehicle!
Use thread lock on all screws that work loose.
Wire cutters
Cross wrench
CA glue&rubber cement
8pcs AA alkaline batteries
for transmitter
Precision ruler
1
IMPORTANT!
BS803-031
Lipo battery charger
