Please read the instruction carefully before starting the assembly.
1.Please assemble and install this R/C vehicle without children’s reach,as it includes
small and sharp parts.
2.Do not run the vehicle on public streets or highways,as it might cause serious
accidents,personal injuries and property damage etc.
3.During racing and after operation,the motor and ESC will become HOT.
Therefore please do not touch them before cooling down.
4.Please make sure everyone is using different frequencies while racing the vehicle
in the same area.
TRANSMITTER PREPARATION
Install eight "AA" batteries into transmitter,making
sure the polarity is correct.
Insert the antenna into the top of the transmitter and
tighten the screw.
Turn the transmitter on and check the battery light.
If all LED's light up,the batteries are acceptable.If
only the red LED lights up,immediately replace the
batteries.
2
