CRYSTAL CLEAN AIR
TM
GENERAL INSTALLATION GUIDELINES
10
BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173
T: 866-360-5675 email: sales@bsesales.com web: www.bsesales.com
Installation BA-800/BA-1000
WARNING
•
•
•
Installation Instruction
1.
Place the unit on the wall and mark the location of the four (4) holes.
2.
Drill four (4) holes and drive the four (4) plastic anchors into each of the drilled holes.
3.
Hold the unit in place as you drill the screws into the top left and right of the unit.
4.
After the top of the unit is secure, attach the bottom with the remaining two (2) screws. Tighten all screws.
5.
After the unit is anchored, test the installation by gently applying downward pressure with both hands and jiggling to
be sure it is attached securely.
6.
If the unit is loose, repeat the steps above and adjust the screws, as necessary. If the unit is secure, the installation is
complete.
7.
Plug in the cord into a power outlet and enjoy cleaner air!
