13/25
input voltage
:
12V or 24V DC
stop voltage
:
14.4V or 28.8V
current of solar module
:
10A
Max. current
:
40A
Max. diameter of rotor blades
:
1.80M
BSG in a system with solar panels(Hybrid System)
Figure 4-5
NOTE: In this drawing the BSG internal regular is used. The other type external regulator can
also be used. The version type regulator could be used in any of the systems.
3.2 Mounting Tower
Size of tower normally is 80mm diameter outside. There is a soft coupling inside the yaw
shaft mount that is designed to provide a secure fit the tower. The pole must be mounted
with hardware specifically designed for small wind turbines.
Attaching to Pole
While attaching the turbine to the tower, be careful not to pinch the yaw wires. Slide the yaw all
the way down over the end of pole.
Make sure that your tower allows for proper clearance of the blades.