22/25
Solar energy input(W)
500
System Voltage(V)
48 or 72
8
. MAINTENANCE
Although your
BSG
has been designed to run for long periods without requiring
any maintenance, reliability and performance will be enhanced if you
periodically inspect your system. Before performing any inspection, be sure to shut
down the turbine.
CAUTION:
NEVER APPROACH THE TURBINE DURING OPERATION.
THE ROTOR BLADES ARE SHARP. PLEASE HANDLE WITH CARE.
The BSG is a very reliable set and is designed to run for long periods at severe
conditions without any maintenance. But routine checking of your own system tower
and cable wiring system is suggested to maintain the reliability and performance of
the system.
The following items should be checked when bad weather:
· Please check the wind turbine in strong wind areas two times the year, in normal
wind areas one times the year or after every strong storm with a wind speed over 25
m/s or hail.
·If you polish the blades surface, before the wintertime is coming with a politure with
nano or lotus flower effect, then there can not set any ice or snow at the blades.
So the wind turbine can better work under snow conditions. if you are not sure, if there
is any problem with the wind turbine, don´t use it and fix one blade with a a robe at the
pole and let the wind turbine work after a professional specialist have check your
system.
·If you hear, that a extreme wind is coming, please also fix one rotor blade to the pole
with a robe. Then you will have a long lifetime with your wind turbine without any
complications.
·
Check guy rope tension and tighten if needed, especially after storms. During first
three months after erecting the tower, periodic inspection should be carried out.
·
Check all electrical connections to make sure they are properly connected, tightened
and free from corrosion.
The following items should be checked two months after the initial installation and then
every six months thereafter:
• Check blades for chips or nicks. Replace blades if damaged.
Do not operate the
turbine with chipped or unbalanced blades. This can cause severe wear,
