23/25
damage, and possible failure. Do not install individual blades. The blades are
balanced as sets.
•
Check the blade bolts and the hub nut for tightness.
Please check if the blades are
smooth and free of any crack, check all screws that all screws ar still fitted,
special also the screws which fix the generator.
• Make sure the yaw clamp bolts securing your
BSG
are tightened to the
appropriate torque specification see Section 3.2.1.
•
Inspect the tower.
• Dirt or debris build-up on the blades and body may cause a decrease in
performance of the turbine and or long-term damage that is not covered by the
warranty. Wash off any buildup with clean soap and water.
•
Check all electrical connections to make sure they are tight and free from corrosion.
• As with all charging systems, check your battery water levels and add
distilled water in accordance with manufacturer’s recommendation.
•
Check the nose cone.
8.1 BATTERIES
It is important to consult your dealer for the most up-to-date
information and for help in selecting the appropriate battery.
NOTE:
Refer to battery manufacture for specific recommendations regarding
installation, maintenance, charging and operation.
