14
- the green LED Modeflashes (setup of
access code).
- choose number (position) for the access
code between 1 and 8, as under chosen
number (positions) 1 a new basic Master code
will be set.
- the LED PRG flashes continuously (a
number, position has been chosen), herewith
a LED corresponding to the chosen positions
lights on.
- enter four digits access code using but-
tons from 0 to 9. A double bleep of accep-
tance is heard.
- to record the new code it is necessary to
reenter the code . A double bleep of acceptance
is heard again.
In case of error a long bleep is heard and
the record failed.
- system automatically comes out (quits) the
access codes setup mode.
- removing (erasing) an existing code is
done by entering basic Master code of the cho-
sen positions (from 2 to 8).
- the basic Master code (of positions 1) can
only be change.
