1 2
Front Panel Controls
5.0
Controls
A
Store key
Program data can be stored to either internal memory, or a PC card, and is
done by using the store facility. The STORE key also doubles as an ENTER key
for confirmation of some actions.
Refer to section 11.1; Storing
B
Recall key
Program data is recalled to the unit from either internal memory or a PC card
using the recall facility.
Refer to section 11.2; Recalling
C
UP/DOWN Keys
Controller keys for editing parameters displayed by the LCD screen.
D
Mode LEDs
Displays whether the FDS-355 is currently in Utils, Store or Recall mode.
E
Main Display
The main LCD screen displays current parameters being edited with numerical
and graphical representations. When the user is not editing, the screen can
display the overall system response, or a custom logo.
F
Encoder (Parameter wheel)
The encoder/parameter wheel is used in conjunction with the UP/DOWN keys
to input or select information, and also to move between screens. Pushing and
holding the wheel in will return you to the default screen after a few seconds.
Pushing and holding the encoder, then pressing a mute button, will take the
display to the corresponding output channel.
G
Input meter
Input signal level referenced to the clip level. Actual signal clipping will
occur slightly above the 'clip' indicator.
Fig 5.1 Front panel
5.1 Input section
Summary of Contents for FDS 355
